1
/
of
1
Universal Car Roof Spoiler LED Light Strip Brake/Turn Signal 130cm – Carbon 130cm
Universal Car Roof Spoiler LED Light Strip Brake/Turn Signal 130cm – Carbon 130cm
Regular price
£16.79 GBP
Regular price
Sale price
£16.79 GBP
Unit price
/
per
Taxes included.
Couldn't load pickup availability
Goodream Carbon Fiber Led Car Spoiler Light Strip
Feature:
1. High brightness can improve your driving safety in any inclement weather and reduce accidents.
2. As the rear spoiler of the car, it improves the stability of the car and makes the appearance of the car more individual.
3. As a warning light for safe driving at night.
4. Using high-brightness LED and energy-saving carbon fiber, the service life is longer.
5. No damage to the wiring, independent controller, stable operation.
6. IP68, 100% waterproof.
Flashing Modes:
1.Braking Light: All LED light always keeps on glowing(high red light)；
2.Emergency Flashers: led lights will flowing light up from the center to two side and cycle；
3.Driving Light: All LED light always keeps on glowing(low red light)；
4.Left Turn Signal: Light flows to the left.
5.Right Turn Signal: Light flows to the right.
Specification:
Voltage: 12V
Material: Carbon Fiber+LED+PVC
Waterproof rating: IP68
Luminous color: Red
Model: General Motors
Boarding position: Rear spoiler light
Function: driving lights, turn signals, brake lights, double flash
Size: 130cm (length), about 51 inches
Installation Method:
1. Remove the snaps of the right tail light in the trunk, and take the tail light wiring harness off.
2. Refer to the wiring diagram to connect the correct car wires. Test if the spoiler light is working properly.
3. Clean the sticking surface of the trunk cover, stick the light strip on the trunk, and press firmly for 10 seconds to fix it. (No contact with water recently)
4. Hide the wires and install the snaps, secure the wires with cable ties or tape.
Note: You can contact us if you have any questions. If the adhesive tape is contaminated, you can use some 3M tape. Built-in program, cannot cut.
Feature:
1. High brightness can improve your driving safety in any inclement weather and reduce accidents.
2. As the rear spoiler of the car, it improves the stability of the car and makes the appearance of the car more individual.
3. As a warning light for safe driving at night.
4. Using high-brightness LED and energy-saving carbon fiber, the service life is longer.
5. No damage to the wiring, independent controller, stable operation.
6. IP68, 100% waterproof.
Flashing Modes:
1.Braking Light: All LED light always keeps on glowing(high red light)；
2.Emergency Flashers: led lights will flowing light up from the center to two side and cycle；
3.Driving Light: All LED light always keeps on glowing(low red light)；
4.Left Turn Signal: Light flows to the left.
5.Right Turn Signal: Light flows to the right.
Specification:
Voltage: 12V
Material: Carbon Fiber+LED+PVC
Waterproof rating: IP68
Luminous color: Red
Model: General Motors
Boarding position: Rear spoiler light
Function: driving lights, turn signals, brake lights, double flash
Size: 130cm (length), about 51 inches
Installation Method:
1. Remove the snaps of the right tail light in the trunk, and take the tail light wiring harness off.
2. Refer to the wiring diagram to connect the correct car wires. Test if the spoiler light is working properly.
3. Clean the sticking surface of the trunk cover, stick the light strip on the trunk, and press firmly for 10 seconds to fix it. (No contact with water recently)
4. Hide the wires and install the snaps, secure the wires with cable ties or tape.
Note: You can contact us if you have any questions. If the adhesive tape is contaminated, you can use some 3M tape. Built-in program, cannot cut.
Share
